From 7f9e44aecffe55eb5960d36a397167f8c393dd11 Mon Sep 17 00:00:00 2001 From: coelner Date: Mon, 7 Aug 2023 21:33:07 +0200 Subject: [PATCH] unit260b --- unit260b.md | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 unit260b.md diff --git a/unit260b.md b/unit260b.md new file mode 100644 index 0000000..e16c7a2 --- /dev/null +++ b/unit260b.md @@ -0,0 +1,10 @@ +# Uni-T UTi260B +``` +I also opened the UTi260B. Tip: use a small suction cap (like the ones used to remove phone screens) to remove the screen shield in order to avoid scratches instead of using tweezers. Also, don't pull hard on the face because there is a small ribbon cable that connects the buttons to the main PCB. I almost ripped mine.\ +I also attached a script that will enable the USB console. (thanks **optotester** for the initial script)\ +Just unzip to the SD card root, press right for 3 seconds, hold and press left.\ +You will see a new COM in the device manager. Connect using putty (or your preferred terminal client) with baud rate 115200.\ +\ +Use ftpadmin/ftpadmin (no write rigths, safer to just look around) or root/uti160e (careful! you can mess stuff up if you don't know what you're doing. +``` +src: https://www.eevblog.com/forum/thermal-imaging/uni-t-uti260b/msg4361233/?topicseen#msg4361233 \ No newline at end of file