gnuk/NEWS

Gnuk NEWS - User visible changes

* Major changes in Gnuk 0.5

  Released 2010-12-XX, by NIIBE Yutaka

** LED blink
LED blink now shows status output of the card.  It shows the status of
CHV3, CHV2, and CHV1 when GPG is accessing the card.

** New board support "STM8S Discovery"
ST-Link part (with STM32F103C8T6) of STM8S Discovery board is now supported.

** Digital signing for SHA224/SHA256/SHA384/SHA512 digestInfo is now possible.

** Fixes for password management
Now, you can allow card to do digital signing multiple times with
single authentication.  You can use "forcesig" subcommand in card-edit
of GnuPG to enable the feature.

** Key management changes
If you remove all keys, it is possible to import keys again.

** More improved USB-CCID/ICCD implementation.
Gnuk works better with GPG's in-stock protocol stack.  You can do
digital signing (not decryption, key import, or get_public_key in
GPG2).  For decryption, key import and get_public_key, changes are
needed for GPG (scd/ccid-driver.c) to support the case of extended
APDU.  In short, you can sign with Gnuk by GPG 1.

** Windows support.
Gnuk could run on MS Windows, with "usbccid" driver and "winscard"
driver.


* Major changes in Gnuk 0.4

  Released 2010-11-09, by NIIBE Yutaka

** New board support "STBee Mini".

** Flash writing tool for "DfuSe" is included now.

** Since Flash GC is now implemented, it can be used longer.


* Major changes in Gnuk 0.3

  Released 2010-10-23, by NIIBE Yutaka

** Now we have 'configure' script to select target.

** Support system with DFU (Device Firmware Upgrade) downloader.

** New board support "CQ STARM".

** Improved USB-ICCD implementation.  Works fine with GPG's protocol stack.


* Major changes in Gnuk 0.2

  Released 2010-09-13, by NIIBE Yutaka

** With DEBUG=1, timeout is more than 3 seconds.

** Flash ROM entries for random numbers are cleared after use. 

** Board support "STM32 Primer 2" now works.
 

* Major changes in Gnuk 0.1

  Released 2010-09-10, by NIIBE Yutaka

** Enabled force_chv1 (in the pw_status_bytes), so that the decipher works.

** Support both of key for digital signing and key for decryption.

** Decipher is supported.

** New board support "STM32 Primer 2" is added by Kaz Kojima.

** LED behavior is meaningful now.  "ON" during execution.

** Fixed bcdCCID revision number.

** Logo.


* Major changes in Gnuk 0.0

  Released 2010-09-06, by NIIBE Yutaka

** This is initial release.  Only it supports digital signing.

Local Variables:
mode: outline
End: