mirror of
https://salsa.debian.org/gnuk-team/gnuk/gnuk.git
synced 2024-09-20 02:40:08 +00:00
remove boards/ since we have now STM32 Primer2 and CQ STARM
This commit is contained in:
parent
7b116d614e
commit
35c880fc0c
15
NEWS
15
NEWS
@ -1,5 +1,18 @@
|
||||
Gnuk NEWS - User visible changes
|
||||
|
||||
* Major changes in Gnuk 1.1.6
|
||||
|
||||
Released 2015-??-??
|
||||
|
||||
** USB SerialNumber String
|
||||
The way to determine a serial number of Gnuk Token has been changed.
|
||||
It uses the 96-bit unique bits of MCU, but the portion for use is
|
||||
changed.
|
||||
|
||||
** STM32 Primer2 support and CQ STARM support are back.
|
||||
|
||||
|
||||
|
||||
* Major changes in Gnuk 1.1.5
|
||||
|
||||
Released 2015-06-03, by NIIBE Yutaka
|
||||
@ -8,7 +21,7 @@ Gnuk NEWS - User visible changes
|
||||
Since it's getting stable, no debug output any more.
|
||||
|
||||
** Maple mini support.
|
||||
Although it's random number generation is not tested, Maple mini
|
||||
Although its random number generation is not tested, Maple mini
|
||||
support is added.
|
||||
|
||||
** Windows interoperability fix.
|
||||
|
@ -1,10 +0,0 @@
|
||||
#include "config.h"
|
||||
#include "ch.h"
|
||||
#include "hal.h"
|
||||
|
||||
/*
|
||||
* Board-specific initialization code.
|
||||
*/
|
||||
void boardInit(void)
|
||||
{
|
||||
}
|
@ -1,163 +0,0 @@
|
||||
/*
|
||||
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
|
||||
|
||||
This file is part of ChibiOS/RT.
|
||||
|
||||
ChibiOS/RT is free software; you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation; either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
ChibiOS/RT is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
||||
---
|
||||
|
||||
A special exception to the GPL can be applied should you wish to distribute
|
||||
a combined work that includes ChibiOS/RT, without being obliged to provide
|
||||
the source code for any proprietary components. See the file exception.txt
|
||||
for full details of how and when the exception can be applied.
|
||||
*/
|
||||
|
||||
#ifndef _BOARD_H_
|
||||
#define _BOARD_H_
|
||||
|
||||
/*
|
||||
* Setup for the CQ STARM board.
|
||||
*/
|
||||
#undef SET_USB_CONDITION /* No functionality to disconnect USB */
|
||||
#define SET_LED_CONDITION(on) on /* To emit light, call palSetPad */
|
||||
#define GPIO_LED GPIOC_LED
|
||||
#define IOPORT_LED GPIOC
|
||||
|
||||
/*
|
||||
* Board identifier.
|
||||
*/
|
||||
#define BOARD_CQ_STARM
|
||||
#define BOARD_NAME "CQ STARM"
|
||||
|
||||
/*
|
||||
* Board frequencies.
|
||||
*/
|
||||
#define STM32_LSECLK 32768
|
||||
#define STM32_HSECLK 8000000
|
||||
|
||||
/*
|
||||
* MCU type, this macro is used by both the ST library and the ChibiOS/RT
|
||||
* native STM32 HAL.
|
||||
*/
|
||||
#define STM32F10X_MD
|
||||
|
||||
/*
|
||||
* IO pins assignments.
|
||||
*/
|
||||
#define GPIOC_LED 6
|
||||
|
||||
#if 0
|
||||
#define GPIOA_BUTTON 0
|
||||
#define GPIOA_SPI1NSS 4
|
||||
|
||||
#define GPIOB_SPI2NSS 12
|
||||
#define GPIOC_MMCWP 6
|
||||
#define GPIOC_MMCCP 7
|
||||
#define GPIOC_CANCNTL 10
|
||||
#define GPIOC_DISC 11
|
||||
#endif
|
||||
|
||||
/*
|
||||
* I/O ports initial setup, this configuration is established soon after reset
|
||||
* in the initialization code.
|
||||
*
|
||||
* The digits have the following meaning:
|
||||
* 0 - Analog input.
|
||||
* 1 - Push Pull output 10MHz.
|
||||
* 2 - Push Pull output 2MHz.
|
||||
* 3 - Push Pull output 50MHz.
|
||||
* 4 - Digital input.
|
||||
* 5 - Open Drain output 10MHz.
|
||||
* 6 - Open Drain output 2MHz.
|
||||
* 7 - Open Drain output 50MHz.
|
||||
* 8 - Digital input with PullUp or PullDown resistor depending on ODR.
|
||||
* 9 - Alternate Push Pull output 10MHz.
|
||||
* A - Alternate Push Pull output 2MHz.
|
||||
* B - Alternate Push Pull output 50MHz.
|
||||
* C - Reserved.
|
||||
* D - Alternate Open Drain output 10MHz.
|
||||
* E - Alternate Open Drain output 2MHz.
|
||||
* F - Alternate Open Drain output 50MHz.
|
||||
* Please refer to the STM32 Reference Manual for details.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Port A setup.
|
||||
* Everything input with pull-up except:
|
||||
* PA4 - Normal input (ADC_IN4 : VoutX of LIS344ALH).
|
||||
* PA5 - Alternate output (MMC SPI1 SCK).
|
||||
* PA6 - Normal input (MMC SPI1 MISO).
|
||||
* PA7 - Alternate output (MMC SPI1 MOSI).
|
||||
* PA11 - (USBDM)
|
||||
* PA12 - (USBDP)
|
||||
*/
|
||||
#define VAL_GPIOACRL 0xB4B48888 /* PA7...PA0 */
|
||||
#define VAL_GPIOACRH 0x88888888 /* PA15...PA8 */
|
||||
#define VAL_GPIOAODR 0xFFFFFFFF
|
||||
|
||||
/*
|
||||
* Port B setup.
|
||||
* Everything input with pull-up except:
|
||||
* PB13 - Alternate output (MMC SPI2 SCK).
|
||||
* PB14 - Normal input (MMC SPI2 MISO).
|
||||
* PB15 - Alternate output (MMC SPI2 MOSI).
|
||||
*/
|
||||
#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
|
||||
#define VAL_GPIOBCRH 0xB4B88888 /* PB15...PB8 */
|
||||
#define VAL_GPIOBODR 0xFFFFFFFF
|
||||
|
||||
/*
|
||||
* Port C setup.
|
||||
* Everything input with pull-up except:
|
||||
* PC4 - Normal input (ADC_IN14 : VoutY of LIS344ALH).
|
||||
* PC5 - Normal input (ADC_IN15 : VoutZ of LIS344ALH).
|
||||
* PC6 - Push Pull output (LED).
|
||||
* (PC9 - SDCard CD)
|
||||
* (PC12 - SDCard CS)
|
||||
* PC14 - Normal input (XTAL).
|
||||
* PC15 - Normal input (XTAL).
|
||||
*/
|
||||
#define VAL_GPIOCCRL 0x83448888 /* PC7...PC0 */
|
||||
#define VAL_GPIOCCRH 0x44888888 /* PC15...PC8 */
|
||||
#define VAL_GPIOCODR 0xFFFFFFFF
|
||||
|
||||
/*
|
||||
* Port D setup.
|
||||
* Everything input with pull-up except:
|
||||
* (PD9 - USB_DC)
|
||||
*/
|
||||
#define VAL_GPIODCRL 0x88888888 /* PD7...PD0 */
|
||||
#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
|
||||
#define VAL_GPIODODR 0xFFFFFFFF
|
||||
|
||||
/*
|
||||
* Port E setup.
|
||||
* Everything input with pull-up except:
|
||||
*/
|
||||
#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
|
||||
#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
|
||||
#define VAL_GPIOEODR 0xFFFFFFFF
|
||||
|
||||
#if !defined(_FROM_ASM_)
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
void boardInit(void);
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif /* _FROM_ASM_ */
|
||||
|
||||
#endif /* _BOARD_H_ */
|
@ -1,14 +0,0 @@
|
||||
/*
|
||||
* HAL driver system settings.
|
||||
*/
|
||||
#define STM32_SW STM32_SW_PLL
|
||||
#define STM32_PLLSRC STM32_PLLSRC_HSE
|
||||
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1
|
||||
#define STM32_PLLMUL_VALUE 9
|
||||
#define STM32_HPRE STM32_HPRE_DIV1
|
||||
#define STM32_PPRE1 STM32_PPRE1_DIV2
|
||||
#define STM32_PPRE2 STM32_PPRE2_DIV1
|
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV6
|
||||
#define STM32_RTCSEL STM32_RTCSEL_NOCLOCK
|
||||
|
||||
#include "mcuconf-common.h"
|
@ -1,15 +0,0 @@
|
||||
#include "config.h"
|
||||
#include "ch.h"
|
||||
#include "hal.h"
|
||||
|
||||
/*
|
||||
* Board-specific initialization code.
|
||||
*/
|
||||
void boardInit(void)
|
||||
{
|
||||
/*
|
||||
* Clear LED and SHUTDOWN output.
|
||||
*/
|
||||
palClearPad (IOPORT5, GPIOE_LED);
|
||||
palClearPad (IOPORT3, GPIOC_SHUTDOWN);
|
||||
}
|
@ -1,175 +0,0 @@
|
||||
/*
|
||||
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
|
||||
|
||||
This file is part of ChibiOS/RT.
|
||||
|
||||
ChibiOS/RT is free software; you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation; either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
ChibiOS/RT is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
||||
---
|
||||
|
||||
A special exception to the GPL can be applied should you wish to distribute
|
||||
a combined work that includes ChibiOS/RT, without being obliged to provide
|
||||
the source code for any proprietary components. See the file exception.txt
|
||||
for full details of how and when the exception can be applied.
|
||||
*/
|
||||
|
||||
#ifndef _BOARD_H_
|
||||
#define _BOARD_H_
|
||||
|
||||
/*
|
||||
* Setup for the STM32 Primer2.
|
||||
*/
|
||||
#define SET_USB_CONDITION(en) (!en) /* To connect USB, call palClearPad */
|
||||
#define SET_LED_CONDITION(on) (!on) /* To emit light, call palClearPad */
|
||||
#define GPIO_USB GPIOD_DISC
|
||||
#define IOPORT_USB GPIOD
|
||||
#define GPIO_LED GPIOE_LEDR
|
||||
#define IOPORT_LED GPIOE
|
||||
|
||||
/* NeuG settings for ADC2. */
|
||||
|
||||
/*
|
||||
* Board identifier.
|
||||
*/
|
||||
#define BOARD_STM32_PRIMER2
|
||||
#define BOARD_NAME "STM32 Primer2"
|
||||
|
||||
/*
|
||||
* Board frequencies.
|
||||
*/
|
||||
#define STM32_LSECLK 32768
|
||||
#define STM32_HSECLK 12000000
|
||||
|
||||
/*
|
||||
* MCU type, this macro is used by both the ST library and the ChibiOS/RT
|
||||
* native STM32 HAL.
|
||||
*/
|
||||
#define STM32F10X_MD
|
||||
|
||||
/*
|
||||
* IO pins assignments.
|
||||
*/
|
||||
#define GPIOA_BUTTON 8
|
||||
#define GPIOC_SHUTDOWN 13
|
||||
#define GPIOD_DISC 3
|
||||
#define GPIOE_LED 0
|
||||
#define GPIOE_LEDR 1
|
||||
|
||||
/*
|
||||
* I/O ports initial setup, this configuration is established soon after reset
|
||||
* in the initialization code.
|
||||
*
|
||||
* The digits have the following meaning:
|
||||
* 0 - Analog input.
|
||||
* 1 - Push Pull output 10MHz.
|
||||
* 2 - Push Pull output 2MHz.
|
||||
* 3 - Push Pull output 50MHz.
|
||||
* 4 - Digital input.
|
||||
* 5 - Open Drain output 10MHz.
|
||||
* 6 - Open Drain output 2MHz.
|
||||
* 7 - Open Drain output 50MHz.
|
||||
* 8 - Digital input with PullUp or PullDown resistor depending on ODR.
|
||||
* 9 - Alternate Push Pull output 10MHz.
|
||||
* A - Alternate Push Pull output 2MHz.
|
||||
* B - Alternate Push Pull output 50MHz.
|
||||
* C - Reserved.
|
||||
* D - Alternate Open Drain output 10MHz.
|
||||
* E - Alternate Open Drain output 2MHz.
|
||||
* F - Alternate Open Drain output 50MHz.
|
||||
* Please refer to the STM32 Reference Manual for details.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Port A setup.
|
||||
* Everything input with pull-up except:
|
||||
* PA0 - Digital input with PullUp. AN0
|
||||
* PA1 - Digital input with PullUp. AN1
|
||||
* PA2 - Alternate output (USART2 TX).
|
||||
* PA3 - Normal input (USART2 RX).
|
||||
* PA8 - Input with pull-down (PBUTTON).
|
||||
*/
|
||||
#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */
|
||||
#define VAL_GPIOACRH 0x88888888 /* PA15...PA8 */
|
||||
#define VAL_GPIOAODR 0xFFFFFEFF
|
||||
|
||||
/*
|
||||
* Port B setup.
|
||||
* Everything input with pull-up except:
|
||||
* PB13 - Alternate output (AUDIO SPI2 SCK).
|
||||
* PB14 - Normal input (AUDIO SPI2 MISO).
|
||||
* PB15 - Alternate output (AUDIO SPI2 MOSI).
|
||||
*/
|
||||
#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
|
||||
#define VAL_GPIOBCRH 0xB4B88888 /* PB15...PB8 */
|
||||
#define VAL_GPIOBODR 0xFFFFFFFF
|
||||
|
||||
/*
|
||||
* Port C setup.
|
||||
* Everything input with pull-up except:
|
||||
* PC6 - Normal input because there is an external resistor.
|
||||
* PC7 - Normal input because there is an external resistor.
|
||||
* PC13 - Push Pull output (SHUTDOWN)
|
||||
*/
|
||||
#define VAL_GPIOCCRL 0x44888888 /* PC7...PC0 */
|
||||
#define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */
|
||||
#define VAL_GPIOCODR 0xFFFFFFFF
|
||||
|
||||
/*
|
||||
* Port D setup.
|
||||
* Everything input with pull-up except:
|
||||
* PD3 - Push Pull output (USB_DISCONNECT)
|
||||
*/
|
||||
#define VAL_GPIODCRL 0x88883888 /* PD7...PD0 */
|
||||
#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
|
||||
#define VAL_GPIODODR 0xFFFFFFFF
|
||||
|
||||
/*
|
||||
* Port E setup.
|
||||
* Everything input with pull-up except:
|
||||
* PE0 - Push Pull output (LED0).
|
||||
* PD1 - Push Pull output (LED1).
|
||||
*/
|
||||
#define VAL_GPIOECRL 0x88888833 /* PE7...PE0 */
|
||||
#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
|
||||
#define VAL_GPIOEODR 0xFFFFFFFF
|
||||
|
||||
#if 0
|
||||
/*
|
||||
* Port F setup.
|
||||
* Everything input with pull-up except:
|
||||
*/
|
||||
#define VAL_GPIOFCRL 0x88888888 /* PF7...PF0 */
|
||||
#define VAL_GPIOFCRH 0x88888888 /* PF15...PF8 */
|
||||
#define VAL_GPIOFODR 0xFFFFFFFF
|
||||
|
||||
/*
|
||||
* Port G setup.
|
||||
* Everything input with pull-up except:
|
||||
*/
|
||||
#define VAL_GPIOGCRL 0x88888888 /* PG7...PG0 */
|
||||
#define VAL_GPIOGCRH 0x88888888 /* PG15...PG8 */
|
||||
#define VAL_GPIOGODR 0xFFFFFFFF
|
||||
#endif
|
||||
|
||||
#if !defined(_FROM_ASM_)
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
void boardInit(void);
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif /* _FROM_ASM_ */
|
||||
|
||||
#endif /* _BOARD_H_ */
|
@ -1,14 +0,0 @@
|
||||
/*
|
||||
* HAL driver system settings.
|
||||
*/
|
||||
#define STM32_SW STM32_SW_PLL
|
||||
#define STM32_PLLSRC STM32_PLLSRC_HSE
|
||||
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV2
|
||||
#define STM32_PLLMUL_VALUE 12
|
||||
#define STM32_HPRE STM32_HPRE_DIV1
|
||||
#define STM32_PPRE1 STM32_PPRE1_DIV2
|
||||
#define STM32_PPRE2 STM32_PPRE2_DIV1
|
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV6
|
||||
#define STM32_RTCSEL STM32_RTCSEL_NOCLOCK
|
||||
|
||||
#include "mcuconf-common.h"
|
@ -1,69 +0,0 @@
|
||||
/*
|
||||
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
|
||||
|
||||
This file is part of ChibiOS/RT.
|
||||
|
||||
ChibiOS/RT is free software; you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation; either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
ChibiOS/RT is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
||||
---
|
||||
|
||||
A special exception to the GPL can be applied should you wish to distribute
|
||||
a combined work that includes ChibiOS/RT, without being obliged to provide
|
||||
the source code for any proprietary components. See the file exception.txt
|
||||
for full details of how and when the exception can be applied.
|
||||
*/
|
||||
|
||||
#include "ch.h"
|
||||
#include "hal.h"
|
||||
#include "config.h"
|
||||
|
||||
/**
|
||||
* @brief PAL setup.
|
||||
* @details Digital I/O ports static configuration as defined in @p board.h.
|
||||
* This variable is used by the HAL when initializing the PAL driver.
|
||||
*/
|
||||
#if HAL_USE_PAL || defined(__DOXYGEN__)
|
||||
const PALConfig pal_default_config =
|
||||
{
|
||||
{VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
|
||||
{VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
|
||||
{VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
|
||||
{VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
|
||||
{VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
|
||||
#if defined(STM32F10X_HD)
|
||||
{VAL_GPIOFODR, VAL_GPIOFCRL, VAL_GPIOFCRH},
|
||||
{VAL_GPIOGODR, VAL_GPIOGCRL, VAL_GPIOGCRH},
|
||||
#endif
|
||||
};
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Early initialization code.
|
||||
* This initialization must be performed just after stack setup and before
|
||||
* any other initialization.
|
||||
*/
|
||||
void
|
||||
__early_init(void)
|
||||
{
|
||||
stm32_clock_init();
|
||||
}
|
||||
|
||||
const uint8_t *
|
||||
unique_device_id (void)
|
||||
{
|
||||
/* STM32F103 has 96-bit unique device identifier */
|
||||
const uint8_t *addr = (const uint8_t *)0x1ffff7e8;
|
||||
|
||||
return addr;
|
||||
}
|
@ -1,116 +0,0 @@
|
||||
/*
|
||||
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
|
||||
|
||||
This file is part of ChibiOS/RT.
|
||||
|
||||
ChibiOS/RT is free software; you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation; either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
ChibiOS/RT is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
||||
---
|
||||
|
||||
A special exception to the GPL can be applied should you wish to distribute
|
||||
a combined work that includes ChibiOS/RT, without being obliged to provide
|
||||
the source code for any proprietary components. See the file exception.txt
|
||||
for full details of how and when the exception can be applied.
|
||||
*/
|
||||
|
||||
/*
|
||||
* STM32 drivers configuration.
|
||||
* The following settings override the default settings present in
|
||||
* the various device driver implementation headers.
|
||||
* Note that the settings for each driver only have effect if the driver
|
||||
* is enabled in halconf.h.
|
||||
*
|
||||
* IRQ priorities:
|
||||
* 15...0 Lowest...Highest.
|
||||
*
|
||||
* DMA priorities:
|
||||
* 0...3 Lowest...Highest.
|
||||
*/
|
||||
|
||||
/*
|
||||
* HAL driver system settings.
|
||||
*/
|
||||
#define STM32_NO_INIT FALSE
|
||||
#define STM32_HSI_ENABLED TRUE
|
||||
#define STM32_LSI_ENABLED FALSE
|
||||
#define STM32_HSE_ENABLED TRUE
|
||||
#define STM32_LSE_ENABLED FALSE
|
||||
#define STM32_USB_CLOCK_REQUIRED TRUE
|
||||
#define STM32_USBPRE STM32_USBPRE_DIV1P5
|
||||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
|
||||
#define STM32_PVD_ENABLE FALSE
|
||||
#define STM32_PLS STM32_PLS_LEV0
|
||||
|
||||
/*
|
||||
* ADC driver system settings.
|
||||
*/
|
||||
#define USE_STM32_ADC1 TRUE
|
||||
#define STM32_ADC1_DMA_PRIORITY 3
|
||||
#define STM32_ADC1_IRQ_PRIORITY 5
|
||||
#define STM32_ADC1_DMA_ERROR_HOOK() chSysHalt()
|
||||
|
||||
/*
|
||||
* CAN driver system settings.
|
||||
*/
|
||||
#define USE_STM32_CAN1 FALSE
|
||||
#define STM32_CAN1_IRQ_PRIORITY 11
|
||||
|
||||
/*
|
||||
* PWM driver system settings.
|
||||
*/
|
||||
#define USE_STM32_PWM1 FALSE
|
||||
#define USE_STM32_PWM2 FALSE
|
||||
#define USE_STM32_PWM3 FALSE
|
||||
#define USE_STM32_PWM4 FALSE
|
||||
#define STM32_PWM1_IRQ_PRIORITY 7
|
||||
#define STM32_PWM2_IRQ_PRIORITY 7
|
||||
#define STM32_PWM3_IRQ_PRIORITY 7
|
||||
#define STM32_PWM4_IRQ_PRIORITY 7
|
||||
|
||||
/*
|
||||
* SERIAL driver system settings.
|
||||
*/
|
||||
#define USE_STM32_USART1 FALSE
|
||||
#define USE_STM32_USART2 FALSE
|
||||
#define USE_STM32_USART3 FALSE
|
||||
#if defined(STM32F10X_HD) || defined(STM32F10X_CL)
|
||||
#define USE_STM32_UART4 FALSE
|
||||
#define USE_STM32_UART5 FALSE
|
||||
#endif
|
||||
#define STM32_USART1_PRIORITY 12
|
||||
#define STM32_USART2_PRIORITY 12
|
||||
#define STM32_USART3_PRIORITY 12
|
||||
#if defined(STM32F10X_HD) || defined(STM32F10X_CL)
|
||||
#define STM32_UART4_PRIORITY 12
|
||||
#define STM32_UART5_PRIORITY 12
|
||||
#endif
|
||||
|
||||
/*
|
||||
* SPI driver system settings.
|
||||
*/
|
||||
#define USE_STM32_SPI1 FALSE
|
||||
#define USE_STM32_SPI2 FALSE
|
||||
#define STM32_SPI1_DMA_PRIORITY 2
|
||||
#define STM32_SPI2_DMA_PRIORITY 2
|
||||
#define STM32_SPI1_IRQ_PRIORITY 10
|
||||
#define STM32_SPI2_IRQ_PRIORITY 10
|
||||
#define STM32_SPI1_DMA_ERROR_HOOK() chSysHalt()
|
||||
|
||||
/*
|
||||
* USB driver system settings.
|
||||
*/
|
||||
#define STM32_USB_USE_USB1 TRUE
|
||||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
|
||||
#define STM32_USB_USB1_HP_IRQ_PRIORITY 6
|
||||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
|
Loading…
Reference in New Issue
Block a user