mirror of
https://salsa.debian.org/gnuk-team/gnuk/gnuk.git
synced 2024-09-20 19:00:08 +00:00
172 lines
5.1 KiB
C
172 lines
5.1 KiB
C
/*
|
|
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
|
|
|
|
This file is part of ChibiOS/RT.
|
|
|
|
ChibiOS/RT is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
ChibiOS/RT is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
---
|
|
|
|
A special exception to the GPL can be applied should you wish to distribute
|
|
a combined work that includes ChibiOS/RT, without being obliged to provide
|
|
the source code for any proprietary components. See the file exception.txt
|
|
for full details of how and when the exception can be applied.
|
|
*/
|
|
|
|
#ifndef _BOARD_H_
|
|
#define _BOARD_H_
|
|
|
|
#include "config.h"
|
|
/*
|
|
* Setup for the STBee Mini board.
|
|
*/
|
|
|
|
/*
|
|
* Board identifier.
|
|
*/
|
|
#define BOARD_STBEE_MINI
|
|
#define BOARD_NAME "STBee Mini"
|
|
#define CPU_WITH_NO_GPIOE 1
|
|
|
|
#if defined(PINPAD_CIR_SUPPORT) || defined(PINPAD_DIAL_SUPPORT)
|
|
#define HAVE_7SEGLED 1
|
|
/*
|
|
* Timer assignment for CIR
|
|
*/
|
|
#define TIMx TIM3
|
|
#endif
|
|
|
|
/*
|
|
* Board frequencies.
|
|
*/
|
|
#define STM32_LSECLK 32768
|
|
#define STM32_HSECLK 12000000
|
|
|
|
/*
|
|
* MCU type, this macro is used by both the ST library and the ChibiOS/RT
|
|
* native STM32 HAL.
|
|
*/
|
|
#define STM32F10X_MD
|
|
|
|
/*
|
|
* IO pins assignments.
|
|
*/
|
|
#define GPIOA_LED1 13
|
|
#define GPIOA_USB_ENABLE 14
|
|
#define GPIOA_LED2 15
|
|
|
|
#define GPIOC_BUTTON 13
|
|
|
|
/*
|
|
* I/O ports initial setup, this configuration is established soon after reset
|
|
* in the initialization code.
|
|
*
|
|
* The digits have the following meaning:
|
|
* 0 - Analog input.
|
|
* 1 - Push Pull output 10MHz.
|
|
* 2 - Push Pull output 2MHz.
|
|
* 3 - Push Pull output 50MHz.
|
|
* 4 - Digital input.
|
|
* 5 - Open Drain output 10MHz.
|
|
* 6 - Open Drain output 2MHz.
|
|
* 7 - Open Drain output 50MHz.
|
|
* 8 - Digital input with PullUp or PullDown resistor depending on ODR.
|
|
* 9 - Alternate Push Pull output 10MHz.
|
|
* A - Alternate Push Pull output 2MHz.
|
|
* B - Alternate Push Pull output 50MHz.
|
|
* C - Reserved.
|
|
* D - Alternate Open Drain output 10MHz.
|
|
* E - Alternate Open Drain output 2MHz.
|
|
* F - Alternate Open Drain output 50MHz.
|
|
* Please refer to the STM32 Reference Manual for details.
|
|
*/
|
|
|
|
#if defined(PINPAD_CIR_SUPPORT) || defined(PINPAD_DIAL_SUPPORT)
|
|
/*
|
|
* Port A setup.
|
|
* PA6 - (TIM3_CH1) input with pull-up
|
|
* PA7 - (TIM3_CH2) input with pull-down
|
|
* PA11 - input with pull-up (USBDM)
|
|
* PA12 - input with pull-up (USBDP)
|
|
* Everything input with pull-up except:
|
|
* PA13 - Open Drain output (LED1 0:ON 1:OFF)
|
|
* PA14 - Push pull output (USB ENABLE 0:DISABLE 1:ENABLE)
|
|
* PA15 - Open Drain output (LED2 0:ON 1:OFF)
|
|
*/
|
|
#define VAL_GPIOACRL 0x88888888 /* PA7...PA0 */
|
|
#define VAL_GPIOACRH 0x63688888 /* PA15...PA8 */
|
|
#define VAL_GPIOAODR 0xFFFFFF7F
|
|
|
|
/* Port B setup. */
|
|
#define GPIOB_CIR 0
|
|
#define GPIOB_BUTTON 2
|
|
#define GPIOB_ROT_A 6
|
|
#define GPIOB_ROT_B 7
|
|
|
|
#define GPIOB_7SEG_DP 15
|
|
#define GPIOB_7SEG_A 14
|
|
#define GPIOB_7SEG_B 13
|
|
#define GPIOB_7SEG_C 12
|
|
#define GPIOB_7SEG_D 11
|
|
#define GPIOB_7SEG_E 10
|
|
#define GPIOB_7SEG_F 9
|
|
#define GPIOB_7SEG_G 8
|
|
|
|
#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
|
|
#define VAL_GPIOBCRH 0x66666666 /* PB15...PB8 */
|
|
#define VAL_GPIOBODR 0xFFFFFFFF
|
|
#else
|
|
/*
|
|
* Port A setup.
|
|
* PA11 - input with pull-up (USBDM)
|
|
* PA12 - input with pull-up (USBDP)
|
|
* Everything input with pull-up except:
|
|
* PA13 - Open Drain output (LED1 0:ON 1:OFF)
|
|
* PA14 - Push pull output (USB ENABLE 0:DISABLE 1:ENABLE)
|
|
* PA15 - Open Drain output (LED2 0:ON 1:OFF)
|
|
*/
|
|
#define VAL_GPIOACRL 0x88888888 /* PA7...PA0 */
|
|
#define VAL_GPIOACRH 0x63688888 /* PA15...PA8 */
|
|
#define VAL_GPIOAODR 0xFFFFFFFF
|
|
|
|
/* Port B setup. */
|
|
/* Everything input with pull-up */
|
|
#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
|
|
#define VAL_GPIOBCRH 0x88888888 /* PB15...PB8 */
|
|
#define VAL_GPIOBODR 0xFFFFFFFF
|
|
#endif
|
|
|
|
/*
|
|
* Port C setup.
|
|
* Everything input with pull-up except:
|
|
* PC13 - Normal input.
|
|
* PC14 - Normal input.
|
|
* PC15 - Normal input.
|
|
*/
|
|
#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */
|
|
#define VAL_GPIOCCRH 0x44488888 /* PC15...PC8 */
|
|
#define VAL_GPIOCODR 0xFFFFFFFF
|
|
|
|
/*
|
|
* Port D setup.
|
|
* Everything input with pull-up except:
|
|
* PD0 - Normal input (XTAL).
|
|
* PD1 - Normal input (XTAL).
|
|
*/
|
|
#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */
|
|
#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
|
|
#define VAL_GPIODODR 0xFFFFFFFF
|
|
|
|
#endif /* _BOARD_H_ */
|