# Kubernetes Basics **The original author of this page is** [**Jorge**](https://www.linkedin.com/in/jorge-belmonte-a924b616b/) **(read his original post** [**here**](https://sickrov.github.io)**)** ## Architecture & Basics ### What does Kubernetes do? * Allows running container/s in a container engine. * Schedule allows containers mission efficient. * Keep containers alive. * Allows container communications. * Allows deployment techniques. * Handle volumes of information. ### Architecture ![](https://sickrov.github.io/media/Screenshot-68.jpg) * **Node**: operating system with pod or pods. * **Pod**: Wrapper around a container or multiple containers with. A pod should only contain one application (so usually, a pod run just 1 container). The pod is the way kubernetes abstracts the container technology running. * **Service**: Each pod has 1 internal **IP address** from the internal range of the node. However, it can be also exposed via a service. The **service has also an IP address** and its goal is to maintain the communication between pods so if one dies the **new replacement** (with a different internal IP) **will be accessible** exposed in the **same IP of the service**. It can be configured as internal or external. The service also actuates as a **load balancer when 2 pods are connected** to the same service.\ When a **service** is **created** you can find the endpoints of each service running `kubectl get endpoints` ![](<../../.gitbook/assets/image (467) (1).png>) * **Kubelet**: Primary node agent. The component that establishes communication between node and kubectl, and only can run pods (through API server). The kubelet doesn’t manage containers that were not created by Kubernetes. * **Kube-proxy**: is the service in charge of the communications (services) between the apiserver and the node. The base is an IPtables for nodes. Most experienced users could install other kube-proxies from other vendors. * **Sidecar container**: Sidecar containers are the containers that should run along with the main container in the pod. This sidecar pattern extends and enhances the functionality of current containers without changing them. Nowadays, We know that we use container technology to wrap all the dependencies for the application to run anywhere. A container does only one thing and does that thing very well. * **Master process:** * **Api Server:** Is the way the users and the pods use to communicate with the master process. Only authenticated request should be allowed. * **Scheduler**: Scheduling refers to making sure that Pods are matched to Nodes so that Kubelet can run them. It has enough intelligence to decide which node has more available resources the assign the new pod to it. Note that the scheduler doesn't start new pods, it just communicate with the Kubelet process running inside the node, which will launch the new pod. * **Kube Controller manager**: It checks resources like replica sets or deployments to check if, for example, the correct number of pods or nodes are running. In case a pod is missing, it will communicate with the scheduler to start a new one. It controls replication, tokens, and account services to the API. * **etcd**: Data storage, persistent, consistent, and distributed. Is Kubernetes’s database and the key-value storage where it keeps the complete state of the clusters (each change is logged here). Components like the Scheduler or the Controller manager depends on this date to know which changes have occurred (available resourced of the nodes, number of pods running...) * **Cloud controller manager**: Is the specific controller for flow controls and applications, i.e: if you have clusters in AWS or OpenStack. Note that as the might be several nodes (running several pods), there might also be several master processes which their access to the Api server load balanced and their etcd synchronized. #### Volumes: When a pod creates data that shouldn't be lost when the pod disappear it should be stored in a physical volume. **Kubernetes allow to attach a volume to a pod to persist the data**. The volume can be in the local machine or in a **remote storage**. If you are running pods in different physical nodes you should use a remote storage so all the pods can access it. #### Other configurations: * **ConfigMap**: You can configure **URLs** to access services. The pod will obtain data from here to know how to communicate with the rest of the services (pods). Note that this is not the recommended place to save credentials! * **Secret**: This is the place to **store secret data** like passwords, API keys... encoded in B64. The pod will be able to access this data to use the required credentials. * **Deployments**: This is where the components to be run by kubernetes are indicated. A user usually won't work directly with pods, pods are abstracted in **ReplicaSets** (number of same pods replicated), which are run via deployments. Note that deployments are for **stateless** applications. The minimum configuration for a deployment is the name and the image to run. * **StatefulSet**: This component is meant specifically for applications like **databases** which needs to **access the same storage**. * **Ingress**: This is the configuration that is use to **expose the application publicly with an URL**. Note that this can also be done using external services, but this is the correct way to expose the application. * If you implement an Ingress you will need to create **Ingress Controllers**. The Ingress Controller is a **pod** that will be the endpoint that will receive the requests and check and will load balance them to the services. the ingress controller will **send the request based on the ingress rules configured**. Note that the ingress rules can point to different paths or even subdomains to different internal kubernetes services. * A better security practice would be to use a cloud load balancer or a proxy server as entrypoint to don't have any part of the Kubernetes cluster exposed. * When request that doesn't match any ingress rule is received, the ingress controller will direct it to the "**Default backend**". You can `describe` the ingress controller to get the address of this parameter. * `minikube addons enable ingress` ### PKI infrastructure - Certificate Authority CA: ![](https://sickrov.github.io/media/Screenshot-66.jpg) * CA is the trusted root for all certificates inside the cluster. * Allows components to validate to each other. * All cluster certificates are signed by the CA. * ETCd has its own certificate. * types: * apiserver cert. * kubelet cert. * scheduler cert. ## Basic Actions ### Minikube **Minikube** can be used to perform some **quick tests** on kubernetes without needing to deploy a whole kubernetes environment. It will run the **master and node processes in one machine**. Minikube will use virtualbox to run the node. See [**here how to install it**](https://minikube.sigs.k8s.io/docs/start/). ``` $ minikube start 😄 minikube v1.19.0 on Ubuntu 20.04 ✨ Automatically selected the virtualbox driver. Other choices: none, ssh 💿 Downloading VM boot image ... > minikube-v1.19.0.iso.sha256: 65 B / 65 B [-------------] 100.00% ? p/s 0s > minikube-v1.19.0.iso: 244.49 MiB / 244.49 MiB 100.00% 1.78 MiB p/s 2m17. 👍 Starting control plane node minikube in cluster minikube 💾 Downloading Kubernetes v1.20.2 preload ... > preloaded-images-k8s-v10-v1...: 491.71 MiB / 491.71 MiB 100.00% 2.59 MiB 🔥 Creating virtualbox VM (CPUs=2, Memory=3900MB, Disk=20000MB) ... 🐳 Preparing Kubernetes v1.20.2 on Docker 20.10.4 ... ▪ Generating certificates and keys ... ▪ Booting up control plane ... ▪ Configuring RBAC rules ... 🔎 Verifying Kubernetes components... ▪ Using image gcr.io/k8s-minikube/storage-provisioner:v5 🌟 Enabled addons: storage-provisioner, default-storageclass 🏄 Done! kubectl is now configured to use "minikube" cluster and "default" namespace by defaul $ minikube status host: Running kubelet: Running apiserver: Running kubeconfig: Configured ---- ONCE YOU HAVE A K8 SERVICE RUNNING WITH AN EXTERNAL SERVICE ----- $ minikube service mongo-express-service (This will open your browser to access the service exposed port) $ minikube delete 🔥 Deleting "minikube" in virtualbox ... 💀 Removed all traces of the "minikube" cluster ``` ### Kubectl Basics **`Kubectl`** is the command line tool fro kubernetes clusters. It communicates with the Api server of the master process to perform actions in kubernetes or to ask for data. ```bash kubectl version #Get client and server version kubectl get pod kubectl get services kubectl get deployment kubectl get replicaset kubectl get secret kubectl get all kubectl get ingress kubectl get endpoints #kubectl create deployment --image= kubectl create deployment nginx-deployment --image=nginx #Access the configuration of the deployment and modify it #kubectl edit deployment kubectl edit deployment nginx-deployment #Get the logs of the pod for debbugging (the output of the docker container running) #kubectl logs kubectl logs nginx-deployment-84cd76b964 #kubectl describe pod kubectl describe pod mongo-depl-5fd6b7d4b4-kkt9q #kubectl exec -it -- bash kubectl exec -it mongo-depl-5fd6b7d4b4-kkt9q -- bash #kubectl describe service kubectl describe service mongodb-service #kubectl delete deployment kubectl delete deployment mongo-depl #Deploy from config file kubectl apply -f deployment.yml ``` ### YAML configuration files examples Each configuration file has 3 parts: **metadata**, **specification** (what need to be launch), **status** (desired state).\ Inside the specification of the deployment configuration file you can find the template defined with a new configuration structure defining the image to run: ![](<../../.gitbook/assets/image (458) (1) (1).png>) #### Example of Deployment + Service declared in the same configuration file (from [here](https://gitlab.com/nanuchi/youtube-tutorial-series/-/blob/master/demo-kubernetes-components/mongo.yaml)) As a service usually is related to one deployment it's possible to declare both in the same configuration file (the service declared in this config is only accessible internally): ```yaml apiVersion: apps/v1 kind: Deployment metadata: name: mongodb-deployment labels: app: mongodb spec: replicas: 1 selector: matchLabels: app: mongodb template: metadata: labels: app: mongodb spec: containers: - name: mongodb image: mongo ports: - containerPort: 27017 env: - name: MONGO_INITDB_ROOT_USERNAME valueFrom: secretKeyRef: name: mongodb-secret key: mongo-root-username - name: MONGO_INITDB_ROOT_PASSWORD valueFrom: secretKeyRef: name: mongodb-secret key: mongo-root-password --- apiVersion: v1 kind: Service metadata: name: mongodb-service spec: selector: app: mongodb ports: - protocol: TCP port: 27017 targetPort: 27017 ``` #### Example of external service config This service will be accessible externally (check the `nodePort` and `type: LoadBlancer` attributes): ```yaml --- apiVersion: v1 kind: Service metadata: name: mongo-express-service spec: selector: app: mongo-express type: LoadBalancer ports: - protocol: TCP port: 8081 targetPort: 8081 nodePort: 30000 ``` {% hint style="info" %} This is useful for testing but for production you should have only internal services and an Ingress to expose the application. {% endhint %} #### Example of Ingress config file This will expose the application in `http://dashboard.com`. ```yaml apiVersion: networking.k8s.io/v1 kind: Ingress metadata: name: dashboard-ingress namespace: kubernetes-dashboard spec: rules: - host: dashboard.com http: paths: - backend: serviceName: kubernetes-dashboard servicePort: 80 ``` #### Example of secrets config file Note how the password are encoded in B64 (which isn't secure!) ```yaml apiVersion: v1 kind: Secret metadata: name: mongodb-secret type: Opaque data: mongo-root-username: dXNlcm5hbWU= mongo-root-password: cGFzc3dvcmQ= ``` #### Example of ConfigMap A **ConfigMap** is the configuration that is given to the pods so they know how to locate and access other services. In this case, each pod will know that the name `mongodb-service` is the address of a pod that they can communicate with (this pod will be executing a mongodb): ```yaml apiVersion: v1 kind: ConfigMap metadata: name: mongodb-configmap data: database_url: mongodb-service ``` Then, inside a **deployment config** this address can be specified in the following way so it's loaded inside the env of the pod: ```yaml [...] spec: [...] template: [...] spec: containers: - name: mongo-express image: mongo-express ports: - containerPort: 8081 env: - name: ME_CONFIG_MONGODB_SERVER valueFrom: configMapKeyRef: name: mongodb-configmap key: database_url [...] ``` #### Example of volume config You can find different example of storage configuration yaml files in [https://gitlab.com/nanuchi/youtube-tutorial-series/-/tree/master/kubernetes-volumes](https://gitlab.com/nanuchi/youtube-tutorial-series/-/tree/master/kubernetes-volumes).\ **Note that volumes aren't inside namespaces** ### Namespaces Kubernetes supports **multiple virtual clusters** backed by the same physical cluster. These virtual clusters are called **namespaces**. These are intended for use in environments with many users spread across multiple teams, or projects. For clusters with a few to tens of users, you should not need to create or think about namespaces at all. You only should start using namespaces to have a better control and organization of each part of the application deployed in kubernetes. Namespaces provide a scope for names. Names of resources need to be unique within a namespace, but not across namespaces. Namespaces cannot be nested inside one another and **each** Kubernetes **resource** can only be **in** **one** **namespace**. There are 4 namespaces by default if you are using minikube: ``` kubectl get namespace NAME STATUS AGE default Active 1d kube-node-lease Active 1d kube-public Active 1d kube-system Active 1d ``` * **kube-system**: It's not meant or the users use and you shouldn't touch it. It's for master and kubectl processes. * **kube-public**: Publicly accessible date. Contains a configmap which contains cluster information * **kube-node-lease**: Determines the availability of a node * **default**: The namespace the user will use to create resources ```bash #Create namespace kubectl create namespace my-namespace ``` {% hint style="info" %} Note that most Kubernetes resources (e.g. pods, services, replication controllers, and others) are in some namespaces. However, other resources like namespace resources and low-level resources, such as nodes and persistenVolumes are not in a namespace. To see which Kubernetes resources are and aren’t in a namespace: ```bash kubectl api-resources --namespaced=true #In a namespace kubectl api-resources --namespaced=false #Not in a namespace ``` {% endhint %} You can save the namespace for all subsequent kubectl commands in that context. ```bash kubectl config set-context --current --namespace= ``` ### Helm Helm is the **package manager** for Kubernetes. It allows to package YAML files and distribute them in public and private repositories. These packages are called **Helm Charts**. ``` helm search ``` Helm is also a template engine that allows to generate config files with variables: ![](<../../.gitbook/assets/image (462).png>) ## Kubernetes secrets A **Secret** is an object that **contains sensitive data** such as a password, a token or a key. Such information might otherwise be put in a Pod specification or in an image. Users can create Secrets and the system also creates Secrets. The name of a Secret object must be a valid **DNS subdomain name**. Read here [the official documentation](https://kubernetes.io/docs/concepts/configuration/secret/). Secrets might be things like: * API, SSH Keys. * OAuth tokens. * Credentials, Passwords (plain text or b64 + encryption). * Information or comments. * Database connection code, strings… . There are different types of secrets in Kubernetes | Builtin Type | Usage | | ----------------------------------- | ----------------------------------------- | | **Opaque** | **arbitrary user-defined data (Default)** | | kubernetes.io/service-account-token | service account token | | kubernetes.io/dockercfg | serialized \~/.dockercfg file | | kubernetes.io/dockerconfigjson | serialized \~/.docker/config.json file | | kubernetes.io/basic-auth | credentials for basic authentication | | kubernetes.io/ssh-auth | credentials for SSH authentication | | kubernetes.io/tls | data for a TLS client or server | | bootstrap.kubernetes.io/token | bootstrap token data | {% hint style="info" %} **The Opaque type is the default one, the typical key-value pair defined by users.** {% endhint %} **How secrets works:** ![](https://sickrov.github.io/media/Screenshot-164.jpg) The following configuration file defines a **secret** called `mysecret` with 2 key-value pairs `username: YWRtaW4=` and `password: MWYyZDFlMmU2N2Rm`. It also defines a **pod** called `secretpod` that will have the `username` and `password` defined in `mysecret` exposed in the **environment variables** `SECRET_USERNAME` \_\_ and \_\_ `SECRET_PASSWOR`. It will also **mount** the `username` secret inside `mysecret` in the path `/etc/foo/my-group/my-username` with `0640` permissions. {% code title="secretpod.yaml" %} ```yaml apiVersion: v1 kind: Secret metadata: name: mysecret type: Opaque data: username: YWRtaW4= password: MWYyZDFlMmU2N2Rm --- apiVersion: v1 kind: Pod metadata: name: secretpod spec: containers: - name: secretpod image: nginx env: - name: SECRET_USERNAME valueFrom: secretKeyRef: name: mysecret key: username - name: SECRET_PASSWORD valueFrom: secretKeyRef: name: mysecret key: password volumeMounts: - name: foo mountPath: "/etc/foo" restartPolicy: Never volumes: - name: foo secret: secretName: mysecret items: - key: username path: my-group/my-username mode: 0640 ``` {% endcode %} ```bash kubectl apply -f kubectl get pods #Wait until the pod secretpod is running kubectl exec -it secretpod -- bash env | grep SECRET && cat /etc/foo/my-group/my-username && echo ``` ### Secrets in etcd **etcd** is a consistent and highly-available **key-value store** used as Kubernetes backing store for all cluster data. Let’s access to the secrets stored in etcd: ```bash cat /etc/kubernetes/manifests/kube-apiserver.yaml | grep etcd ``` You will see certs, keys and url’s were are located in the FS. Once you get it, you would be able to connect to etcd. ```bash #ETCDCTL_API=3 etcdctl --cert --key --cacert endpoint=[] health ETCDCTL_API=3 etcdctl --cert /etc/kubernetes/pki/apiserver-etcd-client.crt --key /etc/kubernetes/pki/apiserver-etcd-client.key --cacert /etc/kubernetes/pki/etcd/etcd/ca.cert endpoint=[127.0.0.1:1234] health ``` Once you achieve establish communication you would be able to get the secrets: ```bash #ETCDCTL_API=3 etcdctl --cert --key --cacert endpoint=[] get ETCDCTL_API=3 etcdctl --cert /etc/kubernetes/pki/apiserver-etcd-client.crt --key /etc/kubernetes/pki/apiserver-etcd-client.key --cacert /etc/kubernetes/pki/etcd/etcd/ca.cert endpoint=[127.0.0.1:1234] get /registry/secrets/default/secret_02 ``` #### Adding encryption to the ETCD By default all the secrets are **stored in plain** text inside etcd unless you apply an encryption layer. The following example is based on [https://kubernetes.io/docs/tasks/administer-cluster/encrypt-data/](https://kubernetes.io/docs/tasks/administer-cluster/encrypt-data/) {% code title="encryption.yaml" %} ```yaml apiVersion: apiserver.config.k8s.io/v1 kind: EncryptionConfiguration resources: - resources: - secrets providers: - aescbc: keys: - name: key1 secret: cjjPMcWpTPKhAdieVtd+KhG4NN+N6e3NmBPMXJvbfrY= #Any random key - identity: {} ``` {% endcode %} After that, you need to set the `--encryption-provider-config` flag on the `kube-apiserver` to point to the location of the created config file. You can modify `/etc/kubernetes/manifest/kube-apiserver.yaml` and add the following lines: ```yaml containers: - command: - kube-apiserver - --encriyption-provider-config=/etc/kubernetes/etcd/ ``` Scroll down in the volumeMounts: ```yaml - mountPath: /etc/kubernetes/etcd name: etcd readOnly: true ``` Scroll down in the volumeMounts to hostPath: ```yaml - hostPath: path: /etc/kubernetes/etcd type: DirectoryOrCreate name: etcd ``` #### Verifying that data is encrypted Data is encrypted when written to etcd. After restarting your `kube-apiserver`, any newly created or updated secret should be encrypted when stored. To check, you can use the `etcdctl` command line program to retrieve the contents of your secret. 1. Create a new secret called `secret1` in the `default` namespace: ``` kubectl create secret generic secret1 -n default --from-literal=mykey=mydata ``` 2. Using the etcdctl commandline, read that secret out of etcd: `ETCDCTL_API=3 etcdctl get /registry/secrets/default/secret1 [...] | hexdump -C` where `[...]` must be the additional arguments for connecting to the etcd server. 3. Verify the stored secret is prefixed with `k8s:enc:aescbc:v1:` which indicates the `aescbc` provider has encrypted the resulting data. 4. Verify the secret is correctly decrypted when retrieved via the API: ``` kubectl describe secret secret1 -n default ``` should match `mykey: bXlkYXRh`, mydata is encoded, check [decoding a secret](https://kubernetes.io/docs/concepts/configuration/secret#decoding-a-secret) to completely decode the secret. **Since secrets are encrypted on write, performing an update on a secret will encrypt that content:** ``` kubectl get secrets --all-namespaces -o json | kubectl replace -f - ``` #### Final tips: * Try not to keep secrets in the FS, get them from other places. * Check out [https://www.vaultproject.io/](https://www.vaultproject.io) for add more protection to your secrets. * [https://kubernetes.io/docs/concepts/configuration/secret/#risks](https://kubernetes.io/docs/concepts/configuration/secret/#risks) * [https://docs.cyberark.com/Product-Doc/OnlineHelp/AAM-DAP/11.2/en/Content/Integrations/Kubernetes\_deployApplicationsConjur-k8s-Secrets.htm](https://docs.cyberark.com/Product-Doc/OnlineHelp/AAM-DAP/11.2/en/Content/Integrations/Kubernetes\_deployApplicationsConjur-k8s-Secrets.htm) ## References {% embed url="https://sickrov.github.io/" %} {% embed url="https://www.youtube.com/watch?v=X48VuDVv0do" %}